Crimped fitting, 45° elbows, 18mm internal, Copper / copper alloy

Materials:
Bodies: Copper/copper alloy, type stainless steel: 1.4404,Seals: FKM (red)

Temperature range*:
-20 to +200 °C (depending on medium), temporarily max. +280 °C

Operating pressure:
Type copper / copper alloy: 16 bar, Vacuum up to -0.8 bar, Type stainless steel: Ø 15 - 22: 40 bar, Ø 28 - 35: 25 bar, Ø 42 - 54: 16 bar, all diameters: technical gases (for example compressed air, argon, nitrogen, carbon dioxide): 16 bar, Vacuum up to -0.8 bar

Fields of application:
Compressed air, cooling water, industrial water, heating water, heating oil systems, thermic solar systems with glycol or glycol water mixture

Advantages:
•thanks to the FKM seal also suitable for oil bearing compressed air and water/glycol mixtures,
•can be pressed using all standard die sets and slings, which correspond to the original pressing contours M, V and SA,
•use with standard EN 1057 copper tubing (copper/copper alloy type),
•Use with our stainless steel system pipe 1.4404 manufactured according to DIN EN 10312 (Stainless steel type)

Warning:
Crimped fittings made of C steel are not suitable for compressed air lines due to the risk of corrosion. We therefore do not offer them.

Material	Copper / copper alloy
Pipe diameter (outer) d [mm]	18
a [mm]	29
z [mm]	9

{{ $t('shop.all.gewicht') }}	50 g / pcs
{{ $t('shop.display.artikel.zollwarennummer') }}	74121000
{{ $t('shop.display.artikel.rohskonform') }}	{{ $t('shop.all.ja') }}