T push-in fitting 10mm-10mm, IQS-ES LE/IQS-PVDF

Materials:
Type stainless steel: Body and release ring: 1.4401, seals FKM, green (FDA 21 CFR 177.2600), Holding claws: Stainless steel 1.4310, Lubricant: Silicone grease (NSF / ANSI 51 & 61)
Type PVDF: body and release ring: PVDF, threaded part: Stainless steel 1.4401, gaskets: FKM, green (FDA 21 CFR 177.2600), retaining claws: Stainless steel 1.4310, lubricant: Silicone grease (NSF / ANSI 51 & 61)

Temperature range:
Type stainless steel: -20 °C to +200 °C (Ø 16: -15°C to +190°C)
Type PVDF: -20 °C to +120 °C

Operating pressure:
Type stainless steel: -0.95 to 20 bar
Type PVDF: Ø 4 - 6 mm: -0.95 to 20 bar (+20 °C), -0.95 to 10 bar (+100 °C), -0.95 to 3 bar (+120 °C), Ø 8 mm: -0.95 to 20 bar (+20 °C), -0.95 to 8 bar (+100 °C), -0.95 to 3 bar (+120 °C), Ø 10 - 12 mm: -0.95 to 12 bar (+20 °C), -0.95 to 6 bar (+100 °C), -0.95 to 3 bar (+120 °C)

Media:
oiled and unoiled compressed air, non-hazardous gasses and liquids

Advantages:
•Available with conical thread or with cylindrical thread with chambered O-ring,
•Gaskets and lubricants with approval according to FDA or NSF/ANSI,
•type PVDF: lighter and cheaper than push-in fittings made of stainless steel with simultaneous high chemical resistance,
•type PVDF: transparent body allows visibility of the medium inside the connector

Material	PVDF
D [mm]	10
D1 [mm]	10

{{ $t('shop.all.gewicht') }}	30 g / pcs
{{ $t('shop.display.artikel.zollwarennummer') }}	74122000
{{ $t('shop.display.artikel.rohskonform') }}	{{ $t('shop.all.ja') }}
{{ $t('shop.all.hersteller') }}	Sang-A